$55

Bluetooth beacon and sensor.

The Eye Sensor is a rugged, IP67 rated wireless beacon/sensor, made by Teltonika. It is fully compatible with both OBD and wire-in IoTplot terminals, has a range of up to 80m and can be used as either a beacon (for identifying assets much like a tracking chip), or a sensor (for monitoring temperature, humidity and magnetic presence). The device has a built in battery with a life of 2.5+ years.

These devices extend the functionality of your terminal beyond fleet management, and into the IoT realm. They must be provisioned for your account, and this configuration is included in our cost for this device. When you purchase this device, a unique code will be provided to you. If you use the device as a beacon (for tracking goods, trailers etc.), you can configure the associated asset details using this code. You may find more details in the guide. If you use the device as a temperature, humidity or magnet sensor, the information will be displayed for the associated unit.

Eye devices purchased from this website will work with IoTplot terminals on Premium subscription plans only. If you have questions please contact us before purchasing.

Stunning Features

  • Bluetooth Low Energy ID beacon and sensor
  • Robust casing
  • IP67 waterproof rating
  • Measure temperature, humitidy or magnetic presence
  • ID tag
  • 2.5+ year battery life
  • Compact size and mounting points to make it all-rounder suitable for various use cases

Enhanced Applications

  • Construction tool tracking/check in/out
  • Trailer tracking
  • Cold chain monitoring
  • Indoor tracking
  • Waste container tracking
  • Agricultural equipment tracking

Basic characteristics

Model:

  • 1BTSID

Connectivity:

  • Bluetooth 4.2 compliant, Bluetooth 5.2 certified
  • 2.402 – 2.480 GHz Bluetooth operating frequency
  • 1.2dB Bluetooth antenna gain (peak)
  • up to 80 m range
  • Up to 8 dBm transmission power level
  • -88 dBm sensitivity

Functionality:

  • Beacon ID
  • Temperature (measuring range -4 to +140°C)
  • Humidity
  • Movement
  • Magnet detection

Electronics:

  • ST Microelectronics BlueNRG-2 microcontroller
  • 32.768 kHz, 16 MHz Quartz Crystals

Casing:

  • IP67 protection
  • Two holes to screw/leash/strip, tape

Protocol:

  • Eddystone

Technical details

Battery model CR2450 (not replaceable)
Battery type Lithium, Manganese Dioxide (Li/MnO2)
Battery capacity 600 mAh
Battery life expectancy  2.5+ years
Operating temperature  -4 °F … +140 °F
Operating humidity 0% … 100% (no condensation)
Weight 18 g
Dimensions 56,6 mm x 38 mm x 13 mm

Dimension drawing:

Mounting options

1) Place: Directly place the device on a surface such as a table or shelf

2) Using the adhesive sticker: Remove the release liner from one side of the adhesive sticker to stick it on the back of the device, then remove the release liner from the other side to stick it at the desired place on the wall. 

3) Using screws: Place the device on the surface and secure it to the surface using two screws

4) Ziptie: Lead ziptie through both device holes and around an object you want device secured to

5) Hanging: Attach lanyard’s snap hook to one of the holes

Safety information

This message contains information on how to operate the 1BTSID Eye device safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

Precautions

Opening and self repair is strictly forbidden.
All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
The device must be firmly fastened in a pre-defined location.
Installation and/or handling during a lightning storm is prohibited. Dispose of used batteries safely and according to your local regulations. 
Battery is not replaceable. Risk of explosion if battery is replaced by an incorrect type. 
Geolime is not responsible for any harm caused by attempting to tamper with or modify this device.
This marking on the product, accessories or literature indicates that product and its electronic accessories should not be disposed of with other household waste.
This marking on the battery, manual or packaging indicates that batteries in this product should not be disposed with other household waste.

 

Geolime will honor the manufacturer warranty for a period of 12 months. All batteries carry a reduced 6 month warranty period. Post warranty repair service for this product is not provided. If a product fails within mentioned warranty period the product can be:

  • Repaired;
  • Replaced with a new product;
  • Replaced with an equivalent repaired product fulfilling the same functionality;
  • Replaced with a different product fulfilling the same functionality in case of EOL for the original product.

Please note that warranty coverage does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance or inadequate installation – not following operating instructions (including failure to heed warnings), or use with equipment with which is not intended to be used.  Warranty does not apply to any consequential damages. Customer is only allowed to return product as a result of the product being defective, due to order assembly or manufacturing fault. 

During the return merchandise authorization (RMA) part of the warranty process, a technician examines the information provided by a customer in an RMA request form in order to determine whether the equipment is eligible for warranty repair. The RMA request form contains company, addressing and malfunctioning product information and must be filled out by the product’s owner and approved by a Geolime technician before returning a product.